Power supply

What power supply do you need for DYNASTY WARRIORS 9

DYNASTY WARRIORS 9 needs a 400 W or larger power supply (80+ Bronze) by the recommended requirements (GeForce GTX 1060 3GB + Core i7-3770), 400 W at the very least; system load is about 287 W with spikes up to 335 W.

400 Wrecommended PSU
400 Wminimum acceptable

System load and spikes for DYNASTY WARRIORS 9

Average loadShort spikesRecommended PSU
Graphics card (recommended)GeForce GTX 1060 3GB · 120 W
ProcessorCore i7-3770 · 77 W
Board, memory, drives, fans90 W
Average load287 W
Short spikes335 W
recommended PSU400 W · 80+ Bronze

Official requirements of DYNASTY WARRIORS 9

Graphics card · minimum: «NVIDIA GeForce GTX 660 or over»

Graphics card · recommended: «NVIDIA GeForce GTX 1060 or over»

Processor · minimum: «Core i5 2400 or over»

Processor · recommended: «Core i7 3770 or over»

🔌 Calculate for your graphics card

Pick your graphics card and CPU power — same formula.

PSU wattage for DYNASTY WARRIORS 9 by graphics card

Recommended PSU wattage (W) with headroom for peak loads; dashed line — a common 650 W PSU.

Graphics cards with 60+ FPS in DYNASTY WARRIORS 9 and their PSU

Graphics card1080p HighTDPRecommended PSU
GeForce GTX 1660 Ti63120 W400 W
GeForce GTX 1660 Super67125 W400 W
GeForce GTX 107071150 W450 W
GeForce RTX 206079160 W450 W
GeForce GTX 108079180 W500 W
GeForce RTX 305079130 W400 W

The most affordable (by performance) popular graphics cards that reach 60+ FPS at 1080p High by the FPSHQ model, and the PSU they need with the CPU from the requirements.

What else DYNASTY WARRIORS 9 needs

Key figures

data updated

How we calculate

The graphics card and processor come from the game’s official requirements (Steam or the publisher) and are matched to the FPSHQ catalog only by exact model name; power is the rated TDP from the catalog.

One formula for the whole site: load = GPU TDP + CPU TDP + 90 W (board, memory, drives, fans); peak = 1.4 × GPU TDP + CPU TDP + 90 W; recommended PSU — the nearest standard rating not below max(load × 1.3; peak).

If the CPU in the requirements is not recognized, a mid-range 105 W class is used — this is marked on the page.

methodology →

Key figures

Unique FPSHQ metrics from this page's data

400 W (80+ Bronze), minimum 400 W.
Recommended PSU for DYNASTY WARRIORS 9
In short

What power supply do you need for DYNASTY WARRIORS 9

DYNASTY WARRIORS 9 needs a 400 W or larger power supply (80+ Bronze) by the recommended requirements (GeForce GTX 1060 3GB + Core i7-3770), 400 W at the very least; system load is about 287 W with spikes up to 335 W.

Recommended PSU for DYNASTY WARRIORS 9
400 W (80+ Bronze), minimum 400 W.
updated · source: FPSHQ model estimate

FAQ

What PSU do I need for DYNASTY WARRIORS 9?
DYNASTY WARRIORS 9 needs a 400 W or larger power supply (80+ Bronze) by the recommended requirements (GeForce GTX 1060 3GB + Core i7-3770), 400 W at the very least; system load is about 287 W with spikes up to 335 W.
Is 500 W enough for DYNASTY WARRIORS 9?
The recommended PSU for DYNASTY WARRIORS 9 is 400 W, the minimum acceptable is 400 W (calculated from the recommended requirements). If your graphics card is different, use the calculator on this page.
Why a PSU with headroom?
Graphics cards briefly draw more than their rated TDP: the formula accounts for spikes (1.4 × GPU TDP) and a 30% margin over the average load, so the PSU runs quieter and does not trip its protection.
Where does FPSHQ get its data?
From four sources: official developer and Steam system requirements (191,599 games), hardware manufacturers' specifications (1,965 GPUs, 456 CPUs), FPS measurements from reviews, YouTube and players (106 independent measurements and 4,800 rows of aggregated review data), and the FPSHQ model where no measurement exists — always labelled "estimate".

Sources: Steam

FPSHQ unified FPS model estimate (benchmarks + calibration) · data updated · methodology