Power supply

What power supply do you need for Incursion Red River

Incursion Red River needs a 600 W or larger power supply (80+ Bronze) by the recommended requirements (Radeon RX 5700 XT + Core i5-9600K), 550 W at the very least; system load is about 440 W with spikes up to 530 W. For the minimum requirements 450 W is enough.

600 Wrecommended PSU
550 Wminimum acceptable
450 Wfor minimum requirements

System load and spikes for Incursion Red River

Average loadShort spikesRecommended PSU
Graphics card (recommended)Radeon RX 5700 XT · 225 W
ProcessorCore i5-9600K · 125 W
Board, memory, drives, fans90 W
Average load440 W
Short spikes530 W
recommended PSU600 W · 80+ Bronze

Official requirements of Incursion Red River

Graphics card · minimum: «NVIDIA GeForce GTX 1060»

Graphics card · recommended: «NVIDIA GeForcc RTX 2080 / AMD RX 5700 XT»

Processor · minimum: «Intel Core i5-7600K / AMD Ryzen 5 1600»

Processor · recommended: «Intel(R) Core(TM) i5-9600K / AMD Ryzen 5 3600»

🔌 Calculate for your graphics card

Pick your graphics card and CPU power — same formula.

PSU wattage for Incursion Red River by graphics card

Recommended PSU wattage (W) with headroom for peak loads; dashed line — a common 650 W PSU.

Graphics cards with 60+ FPS in Incursion Red River and their PSU

Graphics card1080p HighTDPRecommended PSU
GeForce RTX 2060 Super61175 W550 W
Radeon RX 660062132 W500 W
GeForce GTX 1080 Ti63250 W650 W
Radeon RX 5700 XT68225 W600 W
GeForce RTX 306073170 W550 W
GeForce RTX 505076130 W450 W

The most affordable (by performance) popular graphics cards that reach 60+ FPS at 1080p High by the FPSHQ model, and the PSU they need with the CPU from the requirements.

What else Incursion Red River needs

Key figures

data updated

How we calculate

The graphics card and processor come from the game’s official requirements (Steam or the publisher) and are matched to the FPSHQ catalog only by exact model name; power is the rated TDP from the catalog.

One formula for the whole site: load = GPU TDP + CPU TDP + 90 W (board, memory, drives, fans); peak = 1.4 × GPU TDP + CPU TDP + 90 W; recommended PSU — the nearest standard rating not below max(load × 1.3; peak).

If the CPU in the requirements is not recognized, a mid-range 105 W class is used — this is marked on the page.

methodology →

Key figures

Unique FPSHQ metrics from this page's data

600 W (80+ Bronze), minimum 550 W.
Recommended PSU for Incursion Red River
450 W.
For the minimum requirements
In short

What power supply do you need for Incursion Red River

Incursion Red River needs a 600 W or larger power supply (80+ Bronze) by the recommended requirements (Radeon RX 5700 XT + Core i5-9600K), 550 W at the very least; system load is about 440 W with spikes up to 530 W. For the minimum requirements 450 W is enough.

Recommended PSU for Incursion Red River
600 W (80+ Bronze), minimum 550 W.
For the minimum requirements
450 W.
updated · source: FPSHQ model estimate

FAQ

What PSU do I need for Incursion Red River?
Incursion Red River needs a 600 W or larger power supply (80+ Bronze) by the recommended requirements (Radeon RX 5700 XT + Core i5-9600K), 550 W at the very least; system load is about 440 W with spikes up to 530 W. For the minimum requirements 450 W is enough.
Is 500 W enough for Incursion Red River?
The recommended PSU for Incursion Red River is 600 W, the minimum acceptable is 550 W (calculated from the recommended requirements). If your graphics card is different, use the calculator on this page.
Why a PSU with headroom?
Graphics cards briefly draw more than their rated TDP: the formula accounts for spikes (1.4 × GPU TDP) and a 30% margin over the average load, so the PSU runs quieter and does not trip its protection.
Where does FPSHQ get its data?
From four sources: official developer and Steam system requirements (161,008 games), hardware manufacturers' specifications (1,965 GPUs, 456 CPUs), FPS measurements from reviews, YouTube and players (105 independent measurements and 4,800 rows of aggregated review data), and the FPSHQ model where no measurement exists — always labelled "estimate".

Sources: Steam

FPSHQ unified FPS model estimate (benchmarks + calibration) · data updated · methodology