Eggcelerate! to the North Pole

Eggcelerate! to the North Pole

0.0(0 votes)
Release date 2022-12-15
Genre Racing
What hardware does Eggcelerate! to the North Pole need?

Eggcelerate! to the North Pole has an FPSHQ demand score of 47/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

Eggcelerate! to the North Pole is a game by Tim Beaudet, Tyre Bytes LLC. Steam release date: December 15, 2022. Minimum graphics card per Steam: nVidia GTX 600 Series (or similar).

Description

Deliver Easter eggs on the North Pole and drift around snow banks without dropping an egg. The time-trial challenges are snow joke in this eggspansion.

Data: the game’s Steam store page

About the game

Developer
Tim Beaudet, Tyre Bytes LLC
Publisher
Tyre Bytes LLC
Release date
December 15, 2022
PC platforms
Windows, macOS, Linux

Eggcelerate! to the North Pole system requirements

Component Minimum Recommended
OS Windows 7 (SP1+) Windows 10
Processor x86, x64 with SSE2 support x86, x64 with SSE2 support
Memory 350 MB ОЗУ 1 GB ОЗУ
Graphics nVidia GTX 600 Series (or similar) nVidia GTX 900 Series (or similar)
DirectX версии 10 версии 10
Storage 500 MB 500 MB

Source: the game’s Steam page — requirements published by the developer.

How big is Eggcelerate! to the North Pole and does it need an SSD

Eggcelerate! to the North Pole needs 500 MB of disk space, according to its official system requirements (the game’s Steam page, data as of Oct 11, 2026). requirements

500 MBdisk space
not statedSSD
29 %of 123246 games with an official size are smaller

The requirements of Eggcelerate! to the North Pole do not state a drive type — an SSD is not officially required; it only speeds up loading.

Eggcelerate! to the North PoleEggcelerate! to the North Pole500 MBMedian of 2022 games (n = 10132)Median of 2022 games (n = 10132)1 GBMedian of 123246 FPSHQ gamesMedian of 123246 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBEggcelerate! to the North PoleEggcelerate! to the North Pole500 MBMedian of 2022 games (n = 10132)Median of 2022 games (n = 10132)1 GBMedian of 123246 FPSHQ gamesMedian of 123246 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Oct 11, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for Eggcelerate! to the North Pole on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 230–390 195–325 120–205
GeForce RTX 4090 S 220–370 175–290 100–170
GeForce RTX 5080 S 205–350 155–260 87–150
GeForce RTX 4080 Super A 195–330 140–240 78–130
GeForce RTX 4080 A 185–315 135–225 73–125
Radeon RX 7900 XTX A 185–320 135–230 74–125
GeForce RTX 5070 Ti A 180–305 130–215 69–120
Radeon RX 9070 XT A 175–300 125–210 67–115
Radeon RX 7900 XT A 160–275 110–190 60–105
GeForce RTX 4070 Ti Super A 170–290 120–200 65–110
GeForce RTX 3090 Ti B 155–270 105–185 58–98
Radeon RX 9070 A 150–260 105–180 56–96

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run Eggcelerate! to the North Pole

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameEggcelerate! to the North Pole
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

47
Demand
out of 100

The higher it is, the more powerful a PC you need. Runs even on weak hardware.

🏆 Which GPU do you need for Eggcelerate! to the North Pole?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for Eggcelerate! to the North Pole →

Key figures

Unique FPSHQ metrics from this page's data

47/100
FPSHQ load index
94–155FPS
FPS on RTX 3060, 1080p High model estimate
88–150FPS
FPS on RTX 4070, 1440p Ultra model estimate
6
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
2022
release year
In short

Can my PC run Eggcelerate! to the North Pole?

Eggcelerate! to the North Pole (2022): FPSHQ load index 47 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 94–155 FPS at 1080p High and GeForce RTX 4070 88–150 FPS at 1440p Ultra; 6 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: nVidia GTX 600 Series (or similar); minimum RAM: — GB. Source of the numbers: per the system requirements on Steam (checked Oct 11, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
47 FPSHQ index
RTX 3060 · 1080p High
110 FPS model estimate
RTX 4070 · 1440p Ultra
120 FPS model estimate
updated · source: FPS Eggcelerate! to the North Pole, FPSHQ model estimate

Frequently asked questions about the game

On which platforms is the game available?
The game is available on: Windows, macOS, Linux.
What is the genre of Eggcelerate! to the North Pole?
Genre: Racing. Single-player only.
How big is Eggcelerate! to the North Pole and does it need an SSD?
Eggcelerate! to the North Pole needs 500 MB of free disk space according to its official requirements (the game’s Steam page, data as of Oct 11, 2026). The requirements of Eggcelerate! to the North Pole do not state a drive type — an SSD is not officially required; it only speeds up loading.
Who are the developer and publisher?
Developer: Tim Beaudet, Tyre Bytes LLC. Publisher: Tyre Bytes LLC.
When was or will the game be released?
Released: 2022-12-15.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: nVidia GTX 600 Series (or similar). If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: Eggcelerate! to the North Pole

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!