Skylax! The Lab Runner

Skylax! The Lab Runner

0.0(0 votes)
Release date 2025-03-28
Genre Action Adventure
What hardware does Skylax! The Lab Runner need?

Skylax! The Lab Runner has an FPSHQ demand score of 58/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

Skylax! The Lab Runner is a game by Devran Yılmaz. Steam release date: March 28, 2025. Minimum graphics card per Steam: Nvidia Gtx 940MX. It needs at least 8 GB of RAM.

Description

Skylax! The Lab Runner is an FPS game that presents you with tight gameplay and good mechanics. In the game, you can pass levels either by hiding using the invisible mechanic or by fighting against enemies. And after each level you will upgrade your weapons and utilities!

Data: the game’s Steam store page

About the game

Developer
Devran Yılmaz
Publisher
Devran Yılmaz
Release date
March 28, 2025
PC platforms
Windows

Skylax! The Lab Runner system requirements

Component Minimum Recommended
OS Windows 10 or later 64-bit (latest update) Windows 10 or later 64-bit (latest update)
Processor Intel Core i3 3.1 GHz or AMD Phenom II X3 2.8 GHz AMD Ryzen 5600H
Memory 8 GB ОЗУ 16 GB ОЗУ
Graphics Nvidia Gtx 940MX Nvidia RTX 3050 TI
Storage 1 GB 1 GB
Notes SSD SSD

Source: the game’s Steam page — requirements published by the developer.

How big is Skylax! The Lab Runner and does it need an SSD

Skylax! The Lab Runner needs 1 GB of disk space, according to its official system requirements (the game’s Steam page, data as of Oct 8, 2026). requirements

1 GBdisk space
requiredSSD
44 %of 123053 games with an official size are smaller

An SSD is required for Skylax! The Lab Runner: the publisher lists it already in the minimum requirements — on an HDD the game may stutter while streaming data or fail to start.

Skylax! The Lab RunnerSkylax! The Lab Runner1 GBMedian of 2025 games (n = 19055)Median of 2025 games (n = 19055)1 GBMedian of 123053 FPSHQ gamesMedian of 123053 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBSkylax! The Lab RunnerSkylax! The Lab Runner1 GBMedian of 2025 games (n = 19055)Median of 2025 games (n = 19055)1 GBMedian of 123053 FPSHQ gamesMedian of 123053 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Oct 8, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for Skylax! The Lab Runner on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 200–335 160–270 94–160
GeForce RTX 4090 S 185–310 140–230 77–130
GeForce RTX 5080 S 170–285 120–205 67–115
GeForce RTX 4080 Super A 155–265 110–185 60–100
GeForce RTX 4080 A 150–255 105–175 57–95
Radeon RX 7900 XTX A 150–255 105–180 57–95
GeForce RTX 5070 Ti A 145–245 100–170 53–90
Radeon RX 9070 XT A 140–240 98–165 51–87
Radeon RX 7900 XT A 125–220 88–150 46–78
GeForce RTX 4070 Ti Super A 135–230 93–160 50–84
GeForce RTX 3090 Ti B 120–210 84–140 44–76
Radeon RX 9070 A 120–205 82–140 43–73

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run Skylax! The Lab Runner

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameSkylax! The Lab Runner
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

58
Demand
out of 100

The higher it is, the more powerful a PC you need. Moderate load.

🏆 Which GPU do you need for Skylax! The Lab Runner?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for Skylax! The Lab Runner →

Key figures

Unique FPSHQ metrics from this page's data

58/100
FPSHQ load index
72–120FPS
FPS on RTX 3060, 1080p High model estimate
67–115FPS
FPS on RTX 4070, 1440p Ultra model estimate
5
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
8GB
minimum RAM
2025
release year
In short

Can my PC run Skylax! The Lab Runner?

Skylax! The Lab Runner (2025): FPSHQ load index 58 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 72–120 FPS at 1080p High and GeForce RTX 4070 67–115 FPS at 1440p Ultra; 5 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: Nvidia Gtx 940MX; minimum RAM: 8 GB. Source of the numbers: per the system requirements on Steam (checked Oct 8, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
58 FPSHQ index
RTX 3060 · 1080p High
85 FPS model estimate
RTX 4070 · 1440p Ultra
92 FPS model estimate
updated · source: FPS Skylax! The Lab Runner, FPSHQ model estimate

Frequently asked questions about the game

What are the minimum system requirements for Skylax! The Lab Runner?
Minimum configuration: Intel Core i3 3.1 GHz or AMD Phenom II X3 2.8 GHz, Nvidia Gtx 940MX, 8 GB RAM, 1 GB of disk space.
On which platforms is the game available?
The game is available on: Windows.
How big is Skylax! The Lab Runner and does it need an SSD?
Skylax! The Lab Runner needs 1 GB of free disk space according to its official requirements (the game’s Steam page, data as of Oct 8, 2026). An SSD is required for Skylax! The Lab Runner: the publisher lists it already in the minimum requirements — on an HDD the game may stutter while streaming data or fail to start.
What is the genre of Skylax! The Lab Runner?
Genre: Action Adventure. Single-player only.
Who are the developer and publisher?
Developer: Devran Yılmaz. Publisher: Devran Yılmaz.
When was or will the game be released?
Released: 2025-03-28.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: Nvidia Gtx 940MX. If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: Skylax! The Lab Runner

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!