The Capture Worlds

The Capture Worlds

0.0(0 votes)
Release date 2018-04-19
Genre RPG
What hardware does The Capture Worlds need?

The Capture Worlds has an FPSHQ demand score of 49/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

The Capture Worlds is a game by WorldsDev. Steam release date: April 19, 2018. Minimum graphics card per Steam: AMD Radeon R7 200. It needs at least 8 GB of RAM.

Description

In "The Capture Worlds" you will travel to other worlds to fight monsters which you've never seen before. Capture them, train them and fight back! Become the new ruler of the monsters! Start your new journey now!

Data: the game’s Steam store page

About the game

Developer
WorldsDev
Publisher
WorldsDev
Release date
April 19, 2018
PC platforms
Windows

The Capture Worlds system requirements

Component Minimum Recommended
OS Windows 10 Windows 10
Processor AMD FX-8320 AMD FX-6300
Memory 8 GB ОЗУ —
Graphics AMD Radeon R7 200 AMD Radeon R9 380
DirectX версии 11 версии 11
Storage 2 GB 2 GB

Source: the game’s Steam page — requirements published by the developer.

How big is The Capture Worlds and does it need an SSD

The Capture Worlds needs 2 GB of disk space, according to its official system requirements (the game’s Steam page, data as of Nov 8, 2026). requirements

2 GBdisk space
not statedSSD
59 %of 123157 games with an official size are smaller

The requirements of The Capture Worlds do not state a drive type — an SSD is not officially required; it only speeds up loading.

The Capture WorldsThe Capture Worlds2 GBMedian of 2018 games (n = 6685)Median of 2018 games (n = 6685)600 MBMedian of 123157 FPSHQ gamesMedian of 123157 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBThe Capture WorldsThe Capture Worlds2 GBMedian of 2018 games (n = 6685)Median of 2018 games (n = 6685)600 MBMedian of 123157 FPSHQ gamesMedian of 123157 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Nov 8, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for The Capture Worlds on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 225–380 190–315 115–195
GeForce RTX 4090 S 210–360 165–275 95–160
GeForce RTX 5080 S 200–335 150–250 83–140
GeForce RTX 4080 Super A 185–315 135–225 74–125
GeForce RTX 4080 A 180–305 130–215 69–120
Radeon RX 7900 XTX A 180–305 130–215 70–120
GeForce RTX 5070 Ti A 170–295 120–205 66–115
Radeon RX 9070 XT A 170–285 120–200 64–110
Radeon RX 7900 XT A 155–265 105–180 57–97
GeForce RTX 4070 Ti Super A 160–280 115–195 61–105
GeForce RTX 3090 Ti B 150–255 100–175 55–93
Radeon RX 9070 A 145–250 100–170 53–91

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run The Capture Worlds

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameThe Capture Worlds
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

49
Demand
out of 100

The higher it is, the more powerful a PC you need. Runs even on weak hardware.

🏆 Which GPU do you need for The Capture Worlds?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for The Capture Worlds →

Key figures

Unique FPSHQ metrics from this page's data

49/100
FPSHQ load index
89–145FPS
FPS on RTX 3060, 1080p High model estimate
83–140FPS
FPS on RTX 4070, 1440p Ultra model estimate
6
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
8GB
minimum RAM
2018
release year
In short

Can my PC run The Capture Worlds?

The Capture Worlds (2018): FPSHQ load index 49 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 89–145 FPS at 1080p High and GeForce RTX 4070 83–140 FPS at 1440p Ultra; 6 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: AMD Radeon R7 200; minimum RAM: 8 GB. Source of the numbers: per the system requirements on Steam (checked Nov 8, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
49 FPSHQ index
RTX 3060 · 1080p High
105 FPS model estimate
RTX 4070 · 1440p Ultra
114 FPS model estimate
updated · source: FPS The Capture Worlds, FPSHQ model estimate

Frequently asked questions about the game

What are the minimum system requirements for The Capture Worlds?
Minimum configuration: AMD FX-8320, AMD Radeon R7 200, 8 GB RAM, 2 GB of disk space.
On which platforms is the game available?
The game is available on: Windows.
How big is The Capture Worlds and does it need an SSD?
The Capture Worlds needs 2 GB of free disk space according to its official requirements (the game’s Steam page, data as of Nov 8, 2026). The requirements of The Capture Worlds do not state a drive type — an SSD is not officially required; it only speeds up loading.
What is the genre of The Capture Worlds?
Genre: RPG. Single-player only.
Who are the developer and publisher?
Developer: WorldsDev. Publisher: WorldsDev.
When was or will the game be released?
Released: 2018-04-19.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: AMD Radeon R7 200. If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: The Capture Worlds

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!