ULTIRE: Balls Out

ULTIRE: Balls Out

0.0(0 votes)
Release date 2020-01-28
Genre Racing
What hardware does ULTIRE: Balls Out need?

ULTIRE: Balls Out has an FPSHQ demand score of 52/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

ULTIRE: Balls Out is a game by dimbdev. Steam release date: January 28, 2020. Minimum graphics card per Steam: NVIDIA GeForce GTX 650 Ti, Radeon HD 7870 (~2GB). It needs at least 4 GB of RAM.

Description

Roll the ball, avoid obstacles, use powerups - all that on narrow platforms that require precise ball control - one mistake and you fall! Compete against other players in the Multiplayer Elimination Arena or challenge yourself by climbing the Global (and Friends-Only!) leaderboards in the Race mode.

Data: the game’s Steam store page

About the game

Developer
dimbdev
Publisher
dimbdev
Release date
January 28, 2020
PC platforms
Windows
Mode
multiplayer / co-op

ULTIRE: Balls Out system requirements

Component Minimum Recommended
OS Windows 7 and up —
Processor Intel Core i3-540 or other ~3GHz —
Memory 4 GB ОЗУ —
Graphics NVIDIA GeForce GTX 650 Ti, Radeon HD 7870 (~2GB) —
Storage 1 GB —
Notes You can probably play on even lower specs, the game is not very demanding. —

64-разрядные процессор и операционная система

Source: the game’s Steam page — requirements published by the developer.

How big is ULTIRE: Balls Out and does it need an SSD

ULTIRE: Balls Out needs 1 GB of disk space, according to its official system requirements (the game’s Steam page, data as of Nov 7, 2026). requirements

1 GBdisk space
not statedSSD
44 %of 123206 games with an official size are smaller

The requirements of ULTIRE: Balls Out do not state a drive type — an SSD is not officially required; it only speeds up loading.

ULTIRE: Balls OutULTIRE: Balls Out1 GBMedian of 2020 games (n = 7973)Median of 2020 games (n = 7973)900 MBMedian of 123206 FPSHQ gamesMedian of 123206 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBULTIRE: Balls OutULTIRE: Balls Out1 GBMedian of 2020 games (n = 7973)Median of 2020 games (n = 7973)900 MBMedian of 123206 FPSHQ gamesMedian of 123206 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Nov 7, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for ULTIRE: Balls Out on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 215–365 180–300 105–180
GeForce RTX 4090 S 200–340 155–260 88–150
GeForce RTX 5080 S 190–320 140–235 77–130
GeForce RTX 4080 Super A 175–300 125–210 69–115
GeForce RTX 4080 A 170–285 120–200 65–110
Radeon RX 7900 XTX A 170–290 120–205 65–110
GeForce RTX 5070 Ti A 160–275 115–190 61–105
Radeon RX 9070 XT A 160–270 110–185 59–100
Radeon RX 7900 XT A 145–245 100–170 53–89
GeForce RTX 4070 Ti Super A 150–260 105–180 56–95
GeForce RTX 3090 Ti B 140–240 96–165 51–87
Radeon RX 9070 A 135–235 94–160 50–84

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run ULTIRE: Balls Out

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameULTIRE: Balls Out
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

52
Demand
out of 100

The higher it is, the more powerful a PC you need. Moderate load.

🏆 Which GPU do you need for ULTIRE: Balls Out?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for ULTIRE: Balls Out →

Key figures

Unique FPSHQ metrics from this page's data

52/100
FPSHQ load index
83–135FPS
FPS on RTX 3060, 1080p High model estimate
77–130FPS
FPS on RTX 4070, 1440p Ultra model estimate
5
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
4GB
minimum RAM
2020
release year
In short

Can my PC run ULTIRE: Balls Out?

ULTIRE: Balls Out (2020): FPSHQ load index 52 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 83–135 FPS at 1080p High and GeForce RTX 4070 77–130 FPS at 1440p Ultra; 5 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: NVIDIA GeForce GTX 650 Ti, Radeon HD 7870 (~2GB); minimum RAM: 4 GB. Source of the numbers: per the system requirements on Steam (checked Nov 7, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
52 FPSHQ index
RTX 3060 · 1080p High
97 FPS model estimate
RTX 4070 · 1440p Ultra
106 FPS model estimate
updated · source: FPS ULTIRE: Balls Out, FPSHQ model estimate

Frequently asked questions about the game

What are the minimum system requirements for ULTIRE: Balls Out?
Minimum configuration: Intel Core i3-540 or other ~3GHz, NVIDIA GeForce GTX 650 Ti, Radeon HD 7870 (~2GB), 4 GB RAM, 1 GB of disk space.
On which platforms is the game available?
The game is available on: Windows.
How big is ULTIRE: Balls Out and does it need an SSD?
ULTIRE: Balls Out needs 1 GB of free disk space according to its official requirements (the game’s Steam page, data as of Nov 7, 2026). The requirements of ULTIRE: Balls Out do not state a drive type — an SSD is not officially required; it only speeds up loading.
What is the genre of ULTIRE: Balls Out?
Genre: Racing. Has multiplayer.
Who are the developer and publisher?
Developer: dimbdev. Publisher: dimbdev.
When was or will the game be released?
Released: 2020-01-28.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: NVIDIA GeForce GTX 650 Ti, Radeon HD 7870 (~2GB). If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: ULTIRE: Balls Out

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!