Azulgar: Star Commanders

Azulgar: Star Commanders

0.0(0 votes)
Release date 2017-08-31
Genre Simulation
What hardware does Azulgar: Star Commanders need?

Azulgar: Star Commanders has an FPSHQ demand score of 53/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

Azulgar: Star Commanders is a game by SZEINER. Steam release date: August 31, 2017. Minimum graphics card per Steam: GTX 670 2GB / AMD R9 280 better. It needs at least 8 GB of RAM.

Description

Azulgar: Star Commanders is a Sci-Fi open world sandbox game that puts you in a command of your own custom made space ship. Explore aftermath of the Azulgar event that reshaped the face of the solar system.

Data: the game’s Steam store page

About the game

Developer
SZEINER
Publisher
SZEINER
Release date
August 31, 2017
PC platforms
Windows
Mode
multiplayer / co-op

Azulgar: Star Commanders system requirements

Component Minimum Recommended
OS Windows 7 64bit Windows 10 64bit
Processor Intel Core i5, AMD Athlon X4 Intel Core i7-4690K / AMD Ryzen 5 1600
Memory 8 GB ОЗУ 16 GB ОЗУ
Graphics GTX 670 2GB / AMD R9 280 better GTX 980 / AMD R9 Fury
DirectX версии 11 версии 11
Storage 2 GB 2 GB
Network Широкополосное подключение к интернету Широкополосное подключение к интернету

Source: the game’s Steam page — requirements published by the developer.

How big is Azulgar: Star Commanders and does it need an SSD

Azulgar: Star Commanders needs 2 GB of disk space, according to its official system requirements (the game’s Steam page, data as of Nov 10, 2026). requirements

2 GBdisk space
not statedSSD
59 %of 123210 games with an official size are smaller

The requirements of Azulgar: Star Commanders do not state a drive type — an SSD is not officially required; it only speeds up loading.

Azulgar: Star CommandersAzulgar: Star Commanders2 GBMedian of 2017 games (n = 5303)Median of 2017 games (n = 5303)765 MBMedian of 123210 FPSHQ gamesMedian of 123210 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBAzulgar: Star CommandersAzulgar: Star Commanders2 GBMedian of 2017 games (n = 5303)Median of 2017 games (n = 5303)765 MBMedian of 123210 FPSHQ gamesMedian of 123210 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Nov 10, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for Azulgar: Star Commanders on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 210–360 175–290 105–180
GeForce RTX 4090 S 200–335 150–255 86–145
GeForce RTX 5080 S 185–315 135–230 75–125
GeForce RTX 4080 Super A 170–295 125–205 67–115
GeForce RTX 4080 A 165–280 115–195 63–110
Radeon RX 7900 XTX A 165–285 115–200 63–110
GeForce RTX 5070 Ti A 160–270 110–190 59–100
Radeon RX 9070 XT A 155–265 105–185 58–98
Radeon RX 7900 XT A 140–240 98–165 52–88
GeForce RTX 4070 Ti Super A 150–255 105–175 55–93
GeForce RTX 3090 Ti B 135–235 94–160 50–84
Radeon RX 9070 A 130–230 92–155 48–82

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run Azulgar: Star Commanders

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameAzulgar: Star Commanders
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

53
Demand
out of 100

The higher it is, the more powerful a PC you need. Moderate load.

🏆 Which GPU do you need for Azulgar: Star Commanders?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for Azulgar: Star Commanders →

Key figures

Unique FPSHQ metrics from this page's data

53/100
FPSHQ load index
81–135FPS
FPS on RTX 3060, 1080p High model estimate
75–125FPS
FPS on RTX 4070, 1440p Ultra model estimate
5
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
8GB
minimum RAM
2017
release year
In short

Can my PC run Azulgar: Star Commanders?

Azulgar: Star Commanders (2017): FPSHQ load index 53 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 81–135 FPS at 1080p High and GeForce RTX 4070 75–125 FPS at 1440p Ultra; 5 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: GTX 670 2GB / AMD R9 280 better; minimum RAM: 8 GB. Source of the numbers: per the system requirements on Steam (checked Nov 10, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
53 FPSHQ index
RTX 3060 · 1080p High
95 FPS model estimate
RTX 4070 · 1440p Ultra
103 FPS model estimate
updated · source: FPS Azulgar: Star Commanders, FPSHQ model estimate

Frequently asked questions about the game

What are the minimum system requirements for Azulgar: Star Commanders?
Minimum configuration: Intel Core i5, AMD Athlon X4, GTX 670 2GB / AMD R9 280 better, 8 GB RAM, 2 GB of disk space.
On which platforms is the game available?
The game is available on: Windows.
How big is Azulgar: Star Commanders and does it need an SSD?
Azulgar: Star Commanders needs 2 GB of free disk space according to its official requirements (the game’s Steam page, data as of Nov 10, 2026). The requirements of Azulgar: Star Commanders do not state a drive type — an SSD is not officially required; it only speeds up loading.
What is the genre of Azulgar: Star Commanders?
Genre: Simulation. Has multiplayer.
Who are the developer and publisher?
Developer: SZEINER. Publisher: SZEINER.
When was or will the game be released?
Released: 2017-08-31.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: GTX 670 2GB / AMD R9 280 better. If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: Azulgar: Star Commanders

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!