TITANIC Shipwreck Exploration

TITANIC Shipwreck Exploration

0.0(0 votes)
Release date 2018-10-16
Genre Simulation
What hardware does TITANIC Shipwreck Exploration need?

TITANIC Shipwreck Exploration has an FPSHQ demand score of 54/100: moderate requirements — runs on mid-range cards like the RTX 3060 / RX 6600. Source of the numbers: per the system requirements on Steam.

requirements · data updated · methodology

TITANIC Shipwreck Exploration is a game by Immersive VR Education PLC. Steam release date: October 16, 2018. Minimum graphics card per Steam: GT 8500 or above. It needs at least 8 GB of RAM.

Description

Titanic Shipwreck Exploration is a diving simulator and immersive interactive story. With over 6 hours of game-play it you will leave with a greater understanding of the historic tragedy that unfolded in 1912 leading to the sinking of the worlds most famous ship.

Data: the game’s Steam store page

About the game

Developer
Immersive VR Education PLC
Publisher
Immersive VR Education PLC
Release date
October 16, 2018
PC platforms
Windows

TITANIC Shipwreck Exploration system requirements

Component Minimum Recommended
OS Windows 10 Windows 10
Processor i5 i7
Memory 8 GB ОЗУ 16 GB ОЗУ
Graphics GT 8500 or above GTX 980 or Above
DirectX версии 11 версии 12
Storage 6 GB 6 GB

Source: the game’s Steam page — requirements published by the developer.

How big is TITANIC Shipwreck Exploration and does it need an SSD

TITANIC Shipwreck Exploration needs 6 GB of disk space, according to its official system requirements (the game’s Steam page, data as of Nov 7, 2026). requirements

6 GBdisk space
not statedSSD
86 %of 123239 games with an official size are smaller

The requirements of TITANIC Shipwreck Exploration do not state a drive type — an SSD is not officially required; it only speeds up loading.

TITANIC Shipwreck ExplorationTITANIC Shipwreck Exploration6 GBMedian of 2018 games (n = 6685)Median of 2018 games (n = 6685)600 MBMedian of 123239 FPSHQ gamesMedian of 123239 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GBTITANIC Shipwreck ExplorationTITANIC Shipwreck Exploration6 GBMedian of 2018 games (n = 6685)Median of 2018 games (n = 6685)600 MBMedian of 123239 FPSHQ gamesMedian of 123239 FPSHQ games1 GBLargest: AlbatrossLargest: Albatross2000 GB

Source: official system requirements (the game’s Steam page), captured Nov 7, 2026. The size is the free space needed to install; updates and DLC can make it grow. store.steampowered.com

Tip: keep extra space beyond the listed size — updates are downloaded first and installed afterwards.

🛠 Game crashing or won’t launch?

Step-by-step fixes for common errors and diagnostics for your PC

Open guide →DLL error when launching a gameGames keep crashing: how to find the causeGame won’t start: what to checkStutters and freezes in games

FPS on different graphics cards

FPS forecast for TITANIC Shipwreck Exploration on current 2024–2026 GPUs. Switch the graphics preset — the table recalculates. Average FPS at 1080p / 1440p / 4K.

Graphics card Tier 1080p 1440p 4K
GeForce RTX 5090 S 210–355 170–285 100–175
GeForce RTX 4090 S 195–330 150–250 84–145
GeForce RTX 5080 S 180–310 135–225 73–125
GeForce RTX 4080 Super A 170–290 120–205 66–110
GeForce RTX 4080 A 160–275 115–190 62–105
Radeon RX 7900 XTX A 160–280 115–195 62–105
GeForce RTX 5070 Ti A 155–265 110–185 58–98
Radeon RX 9070 XT A 150–260 105–180 56–95
Radeon RX 7900 XT A 135–235 96–160 50–85
GeForce RTX 4070 Ti Super A 145–250 100–170 54–92
GeForce RTX 3090 Ti B 135–230 92–155 48–82
Radeon RX 9070 A 130–225 90–150 47–81

* Average FPS: real measurements where available, otherwise the unified FPSHQ model. Actual FPS depends on the CPU, game patch and drivers. Reference GPU models without overclocking. methodology

📊 FPS by graphics card (1440p, Ultra)

Green — 60+ FPS (comfortable), yellow — 30–60 (playable), red — below 30. Dashed line marks 60 FPS.

Which graphics cards can run TITANIC Shipwreck Exploration

The most affordable cards the FPSHQ model expects to reach 60+ FPS at 1080p High. This is an estimate, not a measurement.

Submit an FPS measurement

Add your FPS measurement

Share your average FPS. Player measurements are checked, and once a cell has 3+ devices they refine the FPSHQ model.

Submit my resultHow to measure: 60 seconds of normal gameplay (not menus or loading), no frame cap or vsync; read average FPS and 1% low from an overlay.
GameTITANIC Shipwreck Exploration
Resolution
Graphics preset

More details
Laptops only: the mode (TGP) from the vendor utility or an overlay. A measurement with power helps show laptop FPS more precisely.
More precise: “60-second test” in the app

The FPSHQ app for Windows computes average FPS and 1% low from frame times (PresentMon) and, with your consent, submits the result itself.

Get the app

Only aggregates are published: a median over 2+ devices or after review. No name or IP is stored — only a hash to stop abuse. Methodology

54
Demand
out of 100

The higher it is, the more powerful a PC you need. Moderate load.

🏆 Which GPU do you need for TITANIC Shipwreck Exploration?

A ready-made GPU ranking with real FPS in this very game

GPU ranking for TITANIC Shipwreck Exploration →

Key figures

Unique FPSHQ metrics from this page's data

54/100
FPSHQ load index
79–130FPS
FPS on RTX 3060, 1080p High model estimate
74–125FPS
FPS on RTX 4070, 1440p Ultra model estimate
5
of 12 popular GPUs hold 60+ FPS (1440p Ultra)
8GB
minimum RAM
2018
release year
In short

Can my PC run TITANIC Shipwreck Exploration?

TITANIC Shipwreck Exploration (2018): FPSHQ load index 54 out of 100. Per the FPSHQ model, GeForce RTX 3060 delivers 79–130 FPS at 1080p High and GeForce RTX 4070 74–125 FPS at 1440p Ultra; 5 of 12 popular GPUs hold 60+ FPS at 1440p Ultra. Developer's minimum GPU: GT 8500 or above; minimum RAM: 8 GB. Source of the numbers: per the system requirements on Steam (checked Nov 7, 2026); FPSHQ model estimate (not a measurement). (model accuracy)

FPSHQ load index
54 FPSHQ index
RTX 3060 · 1080p High
93 FPS model estimate
RTX 4070 · 1440p Ultra
101 FPS model estimate
updated · source: FPS TITANIC Shipwreck Exploration, FPSHQ model estimate

Frequently asked questions about the game

What are the minimum system requirements for TITANIC Shipwreck Exploration?
Minimum configuration: i5, GT 8500 or above, 8 GB RAM, 6 GB of disk space.
On which platforms is the game available?
The game is available on: Windows.
How big is TITANIC Shipwreck Exploration and does it need an SSD?
TITANIC Shipwreck Exploration needs 6 GB of free disk space according to its official requirements (the game’s Steam page, data as of Nov 7, 2026). The requirements of TITANIC Shipwreck Exploration do not state a drive type — an SSD is not officially required; it only speeds up loading.
What is the genre of TITANIC Shipwreck Exploration?
Genre: Simulation. Single-player only.
Who are the developer and publisher?
Developer: Immersive VR Education PLC. Publisher: Immersive VR Education PLC.
When was or will the game be released?
Released: 2018-10-16.
What FPS will I get in this game?
Use our FPS calculator for a precise forecast for your configuration. Above on this page is a compatibility table with popular GPUs at different resolutions and settings.
Can I play on a budget graphics card?
Minimum: GT 8500 or above. If your GPU is weaker than the minimum, the game may not launch or may stutter badly. On the minimum GPU you usually play at 1080p low with FSR Performance.

Discussions: TITANIC Shipwreck Exploration

No topics yet. Be the first — ask a question.

Comments (0)

Rating:
No comments yet. Be the first!